Possible problems and solutions during the operation of the window sticking machine

When the window sticking machine is turned on, the motor makes abnormal noise and cannot send the film. Solution:

(1) Check if the main motor direction is accurate and adjust it to the precise direction indicated by the arrow;

(2) Is there a defect in the motor driver? Turning off the main power supply of the window sticking machine and turning it on from the beginning can restore normal operation.

Handling method for inaccurate photoelectric tracking during the window sticking mechanism bag:

(1) Inaccurate selection of photoelectric eye adjustment methods and operating conditions, please make accurate adjustments according to the instructions in the manual;

(2) The pre adjusted film feeding length (when adjusting blank bags) has a significant deviation from the practical bag making standards. Therefore, the production line length should be set from scratch or the pressure should be adjusted, and the equipment should be adjusted accordingly

(3) If the film resistance is too high or the quality of the previous process product is poor, the material should be inspected and replaced.